Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
- Removal steps in this procedure may contain installation details.
- Raise and support the vehicle.WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
- Refer to: Rear Subframe .
-
CAUTION: Discard the nut and bolt.
Renew Part: Rear lower control arm nut and bolt Quantity: 1
Torque Specifications:
Stage 1: 80 Nm
Stage 2: 60°
Stage 3: 80 Nm
Stage 4: 60°
CAUTION:
Discard the nut.
Torque Specifications:
Stage 1: 80 Nm
Stage 2: 90°