LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Rear Suspension -- XE (X760)) >> Rear Suspension >> Description And Operation >> Description >> Lower Control Arm And Tie Bar >> Tie arm

Tie arm

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The tie arm is manufactured from forged-aluminium with one end having a bush pressed into a machined bore.

The inner bush locates between brackets on the subframe and is secured with a special eccentric bolt, washer and nut. This allows for the adjustment of the rear wheel toe. Rotation of the bolt moves the eccentric head within a recessed slot in the bracket, allowing the toe to be adjusted within the set limits.

scientia non olet · About LEMON Manuals