Lower control arm
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The lower control arm is cast aluminum with a bushes pressed into the inner section of the arm which provides for the attachment to the subframe. The bushes are located between brackets on the subframe and secured with bolts and nuts. The lower control arm has a platform which provides for the attachment for the coil spring and a location hole for the attachment of the stabilizer-bar link.
The outer section of the lower control arm has a second bush which attaches to the forward end of the wheel knuckle. A bush at the rearward end of the lower control arm attaches to the wheel knuckle' s rear bush by an integral link which provides castor control.