LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Pedestrian Protection System -- XE (X760)) >> Pedestrian Protection System >> Right Pedestrian Protection Hood Actuator (G1058454) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  2. Remove the cowl vent screen.

    Refer to: Cowl Vent Screen .

  3. NOTE: Left-hand shown, right-hand similar.
    G11312534

    Torque Specification: 8 Nm 

scientia non olet · About LEMON Manuals