LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Interior Lighting -- XE (X760)) >> Interior Lighting >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test G: Rear Right Interior Lamp Tests

Pinpoint Test G: Rear Right Interior Lamp Tests

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G1: REAR RIGHT INTERIOR LAMP TEST 1 
    1. Refer to the relevant section of the service information and remove the rear right interior lamp
    2. Open a door
    3. Set a multimeter to measure voltage
    4. Connect the multimeter to rear right interior lamp terminals 2 (GY-VT) and 3 (BK-YE)

    Does the multimeter display battery voltage?

    • Yes  : Install a new rear right interior lamp. To continue with interior lamp function test GO to Pinpoint Test A .
    • No  : Test failed. GO to G2.
  2. G2: REAR RIGHT INTERIOR LAMP TEST 2 
    1. Open a door
    2. Connect the multimeter to rear right interior lamp terminal 3 (BK-YE) and earth

    Did the multimeter measure 0V?

    • Yes  : Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the rear right interior lamp supply circuit for open circuit, high resistance
    • No  : Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the rear right interior lamp earth circuit for open circuit, high resistance
scientia non olet · About LEMON Manuals