Manual Control
The interior lamps can be switched on or off using the manual switch for the front interior lamp. The front interior lamp switch will switch all front and rear interior lamps on or off. If the interior lamps are on when the switch is pressed, all interior lamps will go off. The on and off automatic switching conditions remain effective even when the manual switch is used.
In power mode 4 or 6, the front interior lamp switch is used to switch the interior lamps on, the lamps will remain on continuously. If the ignition is put into power mode 4, the interior lamps will be subject to the 16 minute Body Control Module/Gateway Module (BCM/GWM) timer. The interior lamp is immediately switched off when the vehicle is locked. After a locking procedure, the interior lamp automatic control is reinstated.