Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

Remove the charge air cooler.
Refer to: Charge Air Cooler .
Remove the charge air cooler pipe.
Disconnect the throttle body electrical connector and detach the wiring harness.
CAUTION: Make sure that the mating faces are clean and free of foreign material.

NOTE: Note the orientation of the locating pegs for correct installation of the throttle body.