Occupant Detection Sensor
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Occupant detection sensor |
The occupant detection sensor is installed in the cushion of the front passenger seat, between the foam padding and the cover. The sensor consists of a foil contact circuit, embedded in a plastic sheet. Weight on the sensor reduces the resistance of the circuit, which is detected by the BCM/GWM.
The occupant detection sensor has no interface with the SRS. It only provides an input to the BCM/GWM for the seatbelt reminder function.
For additional information, refer to: Seatbelt System (Description and Operation).