LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Vehicle Dynamic Suspension -- XE (X760)) >> Vehicle Dynamic Suspension >> Front Suspension Height Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  2. Remove the front wheel and tire.

    Refer to: Wheel and Tire .

  3. G11305687
  4. G11305444
  5. G11305689

    Torque Specification: 7 Nm 

scientia non olet · About LEMON Manuals