LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Right Upper Arm (G1920892) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. For additional information, refer to: Front Shock Absorber - AWD  or Front Shock Absorber - RWD  (Removal and Installation).
  3. For additional information, refer to: Windshield Wiper Pivot Arm (Removal and Installation).
  4. G11305494
  5. CAUTION: Discard the nut.
    G11305502

    Renew Part: Upper control arm nut(s) Quantity: 1.

    Torque Specification: 60 Nm 

  6. G11305503

    Torque Specification: 9 Nm 

  7. CAUTION: Discard the nut.
    G11305504

    Renew Part: Upper control arm nut(s) Quantity: 1.

    Torque Specification: 60 Nm 

  8. G11305505
  9. G11305500

    Torque Specification: 9 Nm 

scientia non olet · About LEMON Manuals