LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Rear Lower Arm - AWD >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. Refer to: Wheel and Tire
  3. G11305444
  4. CAUTION: Discard the bolt.
    G11305471

    Renew Part: Shock absorber lower bolt, Quantity: 1.

    Torque Specifications: 

    Stage 1: 60 Nm 

    Stage 2: 120° 

  5. CAUTION: Discard the nut.
    G11305472

    Renew Part: Rear lower control arm nut and bolt, Quantity: 1.

    Torque Specifications:

    Stage 1: 60 Nm 

    Stage 2: 135° 

  6. G11305473
  7. G11305474

    Loosen, but do not fully remove the nut.

  8. G11305475

    Special Tool(s):  JLR-204-793

  9. CAUTION: Discard the nut.
    NOTE: Using a suitable stand, support the wheel knuckle.
    G11305476

    Renew Part: Front lower control arm nut, Quantity: 1.

    Torque Specification: 185 Nm 

  10. CAUTION: Discard the nut and bolt.
    G11305477

    Renew Part: Front lower control arm nut and bolt, Quantity: 1.

    Torque Specifications: 

    Stage 1: 100 Nm 

    Stage 2: 180° 

scientia non olet · About LEMON Manuals