LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Front Stabilizer Bar Link - RWD >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to JACKING AND LIFTING .

  2. Remove the front wheel and tire.

    For additional information, refer to: Wheel and Tire

  3. CAUTION:
    • Remove and discard the nuts.
    G11305493

    Renew Part: Stabilizer bar link nuts Quantity: 2.

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals