Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
- Removal steps in this procedure may contain installation details.
- Refer to: Front Subframe - V6 S/C 3.0L Petrol
-
CAUTION: Discard the nuts.
Renew Part: Stabilizer bar link nuts Quantity: 1.
Torque Specification: 60 Nm