LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Front Stabilizer Bar - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    1. Install the front stabilizer bar.

      Torque Specification: 60 Nm 

  2. Install the front subframe.

    Refer to: Front Subframe - INGENIUM I4 2.0L Petrol

    Refer to: Front Subframe - INGENIUM I4 2.0L Petrol AWD

scientia non olet · About LEMON Manuals