LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Front Suspension -- XE (X760)) >> Front Suspension >> Front Lower Arm Bushing >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure that the bush is correctly seated in the special tool
    G11305561

    Special Tool(s):  JLR-204-815

  2. G11305562

    Using the special tools, install the bush.

    Special Tool(s):  JLR-204-813, JLR-204-815

    General Equipment:  Hydraulic press

  3. G11283685

    Make sure that the bush has been installed to the noted removal position.

  4. G11305558

    Make sure that measurement taken prior to removal is still correct.

  5. G11305557

    Mark the front lower arm with a center punch, once the procedure has been completed. 

    General Equipment:  Center punch

  6. Refer to: Front Lower Arm - INSTALLATION .
scientia non olet · About LEMON Manuals