LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Engine - INGENIUM I4 2.0L Diesel >> Upper Timing Cover >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  2. Refer to: Engine Cover - INGENIUM I4 2.0L Diesel .
  3. NOTE: Install new gaskets.
    G11309010

    Torque Specification: 12 Nm 

  4. G11309011
  5. G11309012
  6. G11309013
  7. G11309014

    Torque Specification: 12 Nm 

  8. G11309015

    Torque Specification: 12 Nm 

  9. G11309016

    Torque Specification: 9 Nm 

  10. CAUTION: Discard the gasket.
    G11309017
scientia non olet · About LEMON Manuals