Brake Vacuum Pump - V6 S/C 3.0L Petrol: Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD
- Refer to:GENERAL PROCEDURES
-
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
-
CAUTION: Be prepared to collect escaping oil.
Torque : 12 Nm
Renew Part: Brake vacuum pump seal Quantity: 1