Head Up Display (HUD)

The HUD is controlled from the Information and Message Center menu.

When selected, the menu offers the following options:

• Selecting the position of the display on the windscreen.
• Display brightness.
• Selecting which information is displayed on the HUD.

Control of the display brightness can be adjusted in three different ways:

• As listed above, manually, from within the HUD selection of the Main Menu in the Information and Message Center.
• If the vehicle lighting is switched on, the HUD display will adjust simultaneously with the manual adjustment of the IC panel light dimmer switch.
• Automatic brightness, controlled using data from the forward ambient light sensor, housed in the rain sensor.

For additional information, Refer to: EXTERIOR LIGHTING

For additional information, Refer to: INFORMATION AND MESSAGE CENTER

Prior to selecting the HUD windscreen position the user should select their desired seating position. The steering wheel controls are used to set the horizontal position of the windscreen display. Once set, the information can be saved in the seat memory control system, storing the selected preferences.

For additional information, refer to: SEATS - STANDARD WHEELBASE