Engine Coolant Temperature Sensor (G2278272): Installation

Install the Engine Coolant Temperature (ECT) sensor.
Install the ECT sensor clip.
Connect the ECT sensor electrical connector.
Vacuum fill the coolant system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221) .
Install the engine undershield.
Refer to: ENGINE UNDERSHIELD - INGENIUM I4 2.0L DIESEL AJ21/INGENIUM I4 2.0L PETROL/INGENIUM I6 3.0L DIESEL/INGENIUM I6 3.0L PETROL .
Install the engine cover.
Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .