Overhead Console (G2502360): Removal
CAUTION:
- Care must be taken to avoid damaging the surrounding components.
- Care must be taken for the clips are easily damaged.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Use the suitable tool to release the overhead console.
- Release the 4 rear clips.
- Release the 2 front clips.
- Reposition the overhead console to get access to the electrical connectors.
- Disconnect the 2 electrical connectors.
- Remove the overhead console.
-
NOTE: Do not disassemble further if the component is removed for access only.
- Disconnect the electrical connector.
- Release the 3 wiring harness clips.
- Release the 3 volumetric sensor clips.
- Release the 4 module clips.
- Remove the volumetric sensor assembly from the overhead console.