Transfer Case Draining And Filling: Draining

WARNING: This page is about a different variant/trim than selected.

NOTE:

Some variation in the illustrations may occur, but the essential information is always correct.
Some components shown removed for clarity.

WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.
Refer to: ENGINE UNDERSHIELD
Position a container to collect the fluid.
CAUTION: Make sure that the area around the component is clean and free of foreign material.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the lower drain plug and allow the fluid to drain.
CAUTION: Make sure that the area around the component is clean and free of foreign material.

NOTE: Discard the sealing washer.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the upper drain plug and allow the fluid to drain.
NOTE: Make sure that all the component mating faces are clean.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install the lower drain plug.

Torque : 25 Nm
CAUTION: Make sure that a new sealing washer is installed.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install the upper drain plug.

Renew Part: Transfer case drain plug washer Quantity: 1 .

Torque : 8 Nm