Electronic Engine Controls - INGENIUM I4 2.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Camshaft position (CMP) sensor bolt | 8 | 6 |
| Crankshaft position (CKP) sensor bolt | 8 | 6 |
| Cylinder head temperature sensor | 10 | 7 |
| Manifold absolute pressure temperature (MAPT) sensor | 4.1 | 3 |
| Heated oxygen sensor (HO2S) | 48 | 35 |
| Cylinder block temperature sensor | 10 | 7 |
| Engine control module (ECM) nuts | 7 | 5 |
| Exhaust gas temperature sensor | 35 | 26 |
| Pre DPF exhaust gas temperature sensor | 35 | 26 |
| Post DPF exhaust gas temperature sensor | 35 | 26 |
| Mass air flow (MAF) sensor bolts | 1.9 | 1.4 |
| Post selective catalyst reduction NOx sensor - without DPF | 48 | 35 |
| Post selective catalyst reduction NOx sensor - With DPF - Without DEF | 48 | 35 |
| Post selective catalyst reduction NOx sensor - With DPF - With DEF | 60 | 44 |
| EGR pressure sensor assembly fixing bolt | 12 | 9 |
| EGR high pressure temperature sensor | 3.6 | 2.7 |
| EGR low pressure temperature sensor | 3.6 | 2.7 |
- DPF - Diesel Particulate Filter
- DEF - Diesel Exhaust Fluid