LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Description And Operation >> Description >> Oil Pressure And Temperature Sensor

Oil Pressure And Temperature Sensor

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
G11308378

The oil pressure and temperature sensor is located in the oil filter and housing assembly located at the front right on the engine. The sensor is located in a threaded port in the housing assembly.

The oil pressure and temperature sensor has a three pin connector. One pin supplies a 5 V reference voltage from the PCM, the second pin provides an oil pressure output to the PCM and the third pin supplies a temperature output to the PCM.

The oil pressure sensor is connected directly to the PCM. The PCM outputs the engine oil pressure state on the HS CAN powertrain systems bus for use by the Instrument Cluster (IC) and the PCM. In the event of oil pressure falling below the operating threshold of the sensor, the PCM issues a message to display a low oil pressure warning in the message center and also to illuminate an oil pressure warning indicator in the IC.

The temperature sensor is an NTC type sensor which operates in a range of -30 °C (-22 °F) to 150 °C (302 °F) temperature range.

scientia non olet · About LEMON Manuals