LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Camshaft Position Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • During the installation, make sure that all components are clean and free from foreign material.
    • Do not use excessive force to install the component.
    NOTE: Lubricate the O-ring seal with clean engine oil.
    G11308416

    Torque Specification: 8 Nm 

  2. G11308415
  3. Refer to: Engine Cover - INGENIUM I4 2.0L Diesel .
scientia non olet · About LEMON Manuals