Car Configuration File (CCF)
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If a new instrument cluster is to be installed, using the Jaguar Land Rover approved diagnostic equipment carry out the instrument cluster renewal procedure - Instrument Panel Cluster Control Module [IPC]/replace ECU. This will ensure that the car configuration file data is correctly transferred from the gateway module to the replacement instrument cluster.
The car configuration file contains all relevant data about the specification and market condition of the applicable vehicle, immobilization codes and driver personal settings. This information is retained in the gateway module and shared with other modules over the CAN network enabling each system module to detect which systems and components are installed to the vehicle. The information is continuously transmitted by the gateway module to ensure that the data is constantly updated and backed-up in each module.