LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Starting System - V6 S/C 3.0L Petrol -- XF/(X260)) >> Starting System - V6 S/C 3.0L Petrol >> Removal And Installation >> Starter Motor >> Installation

Starter Motor : Installation

WARNING: This page is about a different car, the 2020 Jaguar XF and 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the starter motor.

    Torque  : 48 Nm 

  2. Install the lower starter motor bolt.

    Torque  : 48 Nm 

  3. Install the heatshield.

    Torque  : 6 Nm 

  4. Connect the electrical connector.

    Torque  : 7 Nm 

  5. Connect the electrical connector.

    Torque  : 12 Nm 

  6. Secure the clips.
  7. Install the right catalytic converter.

    Refer to: RIGHT CATALYTIC CONVERTER - RWD .

  8. Install the undershield.

    Refer to: ENGINE UNDERSHIELD .

  9. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals