LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol >> Manifold Absolute Pressure Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the engine cover.

    Refer to: Engine Cover - Ingenium I4 2.0L Petrol .

  2. G11306969

    Remove the Noise, Vibration and Harshness (NVH) material.

  3. G00565425

    Release and reposition the vacuum pipes.

  4. G11308590

    Disconnect the MAP electrical connector.

  5. G11308591
    • Remove the Manifold Absolute Pressure (MAP) sensor.
    • Torque Specification: 4 Nm 
scientia non olet · About LEMON Manuals