Electric Park Brake Actuator : Removal

NOTE: Removal steps in this procedure may contain installation details.

Connect the diagnostic tool and set the electronic park brake (EPB) to the maintenance position.
NOTE: This step is only required if the diagnostic tool is not available.

Refer to: ELECTRIC PARK BRAKE SERVICE MODE ACTIVATION AND DEACTIVATION
WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
NOTE: Remove and discard the O-ring seal.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Electric park brake actuator O-ring seal Quantity: 1.

Torque : 8 Nm