Pinpoint Test P: Mechanical Obstruction Inspection
- P1: MECHANICAL OBSTRUCTION INSPECTION NOTE: Before beginning this pinpoint test it may be useful to complete Pinpoint Test S, if not already completed
- Inspect all areas of the luggage compartment lid for mechanical obstruction. Pay particular attention to the latch cover to striker plate interface. If any mechanical obstructions are identified remedy them before retesting. If this requires a move of the luggage compartment lid on the hinges or a striker adjustment then using the Jaguar Land Rover Approved Diagnostic Equipment recalibrate the luggage compartment lid. Retest by pressing the exterior release switch
Does the luggage compartment lid open fully?
Yes: Close the luggage compartment lid and repeat the opening operation 10 more times to ensure failure mode is eliminated
On the warranty claim please quote feedback ID "FID 5.2"
No: GO to PINPOINT TEST Q .
- Inspect all areas of the luggage compartment lid for mechanical obstruction. Pay particular attention to the latch cover to striker plate interface. If any mechanical obstructions are identified remedy them before retesting. If this requires a move of the luggage compartment lid on the hinges or a striker adjustment then using the Jaguar Land Rover Approved Diagnostic Equipment recalibrate the luggage compartment lid. Retest by pressing the exterior release switch