Side Parking Aid Camera (G1817334): Removal
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Removal steps in this procedure may contain installation details.
- Left shown, right is similar.
- The ignition must be switched off.
-
CAUTION: Use a suitable plastic trim tool to release the component.NOTE: Note the fitted position of the locating pegs.
- Refer to: EXTERIOR MIRROR MOTOR
Torque : 0.5 Nm
-
CAUTION: Take extra care not to damage the wiring harness clips.
Torque : 0.5 Nm