Parking Aid System - Operation: Notes
The parking aid system is activated when:
- Reverse (R) gear is selected directly form Park (P).
- Drive (D) gear is selected directly from Park (P) and the Parking aid switch is operated. The front and side sensors are activated only. The sensors will remain active until the vehicle speed is less than 16 km/h (10 mph).
- Parking aid switch is operated for 3 seconds and the vehicle's speed decreases to less than 10 km/h (6 mph), or the vehicle speed is above 16 km/h (10 mph), or Reverse (R) gear is selected and the vehicle speed is below 16km/h (10 mph).