Rear Stabilizer Bar Link (G2214470): Removal
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING .
- Remove the rear wheel and tire.
Refer to: WHEEL AND TIRE .
-
CAUTION:
- Using a suitable tool counter hold the ball joint with the hexagon provided.
- Discard the nut.
Remove the stabilizer bar link upper nut.
-
CAUTION:
- Using a suitable tool counter hold the ball joint with the hexagon provided.
- Discard the nut.
Remove the stabilizer bar link.