Front Air Reservoir Valve Block (G2215088): Installation
- Install the front air reservoir valve block.
-
CAUTION: Do not reuse the Airline connectors. Always install a new Airline connector every time it is released.
- Connect the 3 Airline connectors.
Refer to: AIRLINE CONNECTOR - (+) AIR SUSPENSION .
Renew Part: Airline connector(s) Quantity: 3
- Install the clip.
- Connect the electrical connector.
- Reposition the electric coolant pump.
- Install the undershield.
Refer to: UNDERSHIELD .
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .
- Using Jaguar Land Rover approved diagnostic equipment, pressurize the air suspension system.
Refer to: AIR SUSPENSION SYSTEM DEPRESSURIZE AND PRESSURIZE .
General Equipment : Jaguar Land Rover approved diagnostic equipment