Pollution Sensor (G2225256): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.

- Install and secure the pollution sensor.
- Connect the electrical connector.
- CAUTION: Make sure that the wiring harness is routed correctly.
  
  Position the harness bridge.
- Install and tighten the screw.
  Torque : 5Nm
Install the glovebox.
Refer to: GLOVEBOX .