LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> I-Pace >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Climate Control -- I-Pace/X590) >> Climate Control (G2244547) >> Removal And Installation >> Passenger Side Vent (G2217923) >> Installation

Passenger Side Vent (G2217923): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure the component is held in position when the fixings are secured, failure to follow this instruction may damage the component.
    NOTE: Only do this step if the component was previously removed.
    • Install the passenger side face level vent.
    • Secure with the 6 clips.
  2. NOTE: Only do this step if the component was previously removed.
    • Install the supporting bracket.
    • Install and secure the 2 screws.
  3. NOTE: Make sure that all the clips are correctly installed.
    • Install the trim assembly.
    • Secure with the 6 clips.
    • Install and tighten the 2 screws.
  4. Close the glovebox.
scientia non olet · About LEMON Manuals