Front Left Face Distribution Motor (G2225320): Installation
WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
-
- Install the distribution motor.
- Install and tighten the 3 screws.
Torque : 1.5Nm
- Connect the electrical connector.
-
- Install the heater unit.
- Install and tighten the 5 screws.
- Connect the 5 electrical connector.
- Secure the clip.
- Install the instrument panel cross-car beam.
Refer to: INSTRUMENT PANEL CROSS-CAR BEAM .