LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> I-Pace >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Climate Control -- I-Pace/X590) >> Climate Control (G2244547) >> Removal And Installation >> Electric Air Conditioning Compressor Low Pressure Pipe (G2226014) >> Installation

Electric Air Conditioning Compressor Low Pressure Pipe (G2226014): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Air Conditioning (A/C) compressor low pressure pipe.

    Torque  : 8Nm 

  2. Install a new O-ring seal and secure the low pressure pipe.

    Renew Part: Air conditioning pipe O-ring seal(s)  Quantity: 1  .

    Torque  : 12Nm 

  3. Connect the A/C high pressure temperature sensor.
    • Install the indirect condenser.

      Torque  : 10Nm 

    • Install a new seal and secure the A/C  pipe to the rear of the indirect condenser.

      Renew Part: Air conditioning pipe O-ring seal(s)  Quantity: 1  .

      Torque  : 12Nm 

  4. Install a new O-ring seal and secure the A/C pipe.

    Renew Part: Air conditioning pipe O-ring seal(s)  Quantity: 1  .

    Torque  : 12Nm 

  5. Secure the 2 indirect condenser coolant hoses.
  6. Install the front Electric Drive Unit (EDU).

    Refer to: FRONT ELECTRIC DRIVE UNIT .

  7. Install the electric cooling fan.

    Refer to: ELECTRIC COOLING FAN .

  8. Fill the Electric vehicle battery coolant system.

    Refer to: ELECTRIC DRIVE COOLING SYSTEM DRAIN AND FILL .

  9. Charge the A/C  refrigerant.

    Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING .