LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> I-Pace >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Climate Control -- I-Pace/X590) >> Climate Control (G2244547) >> Removal And Installation >> Blower (G2225943) >> Installation

Blower (G2225943): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the blower.

    Torque  : 1.3Nm 

  2. Install the blower assembly and the 3 retaining screws.

    Torque  : 2.4Nm 

  3. Connect the blower electrical connector.
  4. Connect the start up battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

scientia non olet · About LEMON Manuals