LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> I-Pace >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Climate Control -- I-Pace/X590) >> Climate Control (G2244547) >> Removal And Installation >> Air Conditioning Compressor Inlet Pipe (G2225280) >> Installation

Air Conditioning Compressor Inlet Pipe (G2225280): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Air Conditioning (A/C) compressor inlet pipe to the receiver dryer.

    Renew Part: Air conditioning pipe O-ring seal(s)  Quantity: 2  .

    Torque  : 10Nm 

  2. Install the wiring harness electrical connector to the A/C  temperature and pressure sensor.
  3. Install the front Electric Drive Unit (EDU).

    Refer to: FRONT ELECTRIC DRIVE UNIT .

  4. Install the front stowage compartment.

    Refer to: FRONT STOWAGE COMPARTMENT .

  5. Install the front subframe.

    Refer to: FRONT SUBFRAME .