LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> I-Pace >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Climate Control -- I-Pace/X590) >> Climate Control (G2244547) >> Removal And Installation >> Accumulator (G2224393) >> Installation

Accumulator (G2224393): Installation

WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the A/C  accumulator.
    • Install the bracket.
    • Install and tighten the 4 bolts.

      Torque  : 10Nm 

    • Install the 2 new O-ring seals.
    • Reposition the A/C  pipe into the correct position.
    • Install and tighten the A/C  pipe bolt.

      Torque  : 10Nm 

    • Reposition the 4 coolant hoses into the correct location.
    • Install the 6 clips.
    • Install the 4 new O-ring seals.
    • Install the A/C  pipe.
    • Install and tighten the 2 bolts.

      Torque  : 8.5Nm 

    • Install the 4 wiring harness clips.
    • Reposition the wiring harness into the correct location
    • Install the 3 wiring harness clips.
    • Connect the electrical connector.
  5. Install the front EDU  .

    Refer to: FRONT ELECTRIC DRIVE UNIT .

scientia non olet · About LEMON Manuals