Programmed Demist
WARNING: This page is about a different car, the 2021 Jaguar I-Pace, 2020 Jaguar I-Pace, and 2019 Jaguar I-Pace. However, it is still accessible from the selected car via links, so may be relevant.
When the maximum demist switch on the Integrated Control Panel (ICP) is operated, the HVAC control module instigates the programmed demist function.
When maximum demist is selected, the HVAC configures the system as follows:
- Automatic mode off.
- Selected temperature unchanged.
- Air intake set to fresh air.
- Air distribution set to windshield.
- Blower speed set to level 6.
- Rear window heater on and windshield heater (if equipped) on.
The programmed demist function can be cancelled by 1 of the following:
- Selecting any air distribution switch on the ICP or the lower Touchscreen (TS) (if equipped).
- Pressing the 'AUTO' switch on the ICP
- A second press of the maximum demist switch.
- Switching the ignition off.
The blower speed can be adjusted without terminating the programmed demist function.