Instrument Cluster

The warning indicators are located in various positions in the Instrument Cluster (IC).

Self controlled warning indicators are dependent on software logic within the IC for activation. The IC software controls the warning indicator check illumination at Power Mode 6 (ignition on) and all indicators whose operation is controlled by the IC.

Externally controlled indicators are supplied with voltage from another system control module or illuminated by the IC on receipt of a bus message. Some indicators are activated by an external system control module but the IC contains the control logic.

For further information on the Steering Wheel Module (SWM) see the audio system. For additional information, Refer to: AUDIO SYSTEM .