Toe Link (G1899822): Installation

CAUTION: Only fully tighten the nut when the wheel alignment has been checked and is within specification.
- Install the bolt.
- Install and tighten the nut.
  Torque
  
  Stage 1: 60 Nm
  
  Stage 2: 90°
CAUTION: Only fully tighten the nut when the wheel alignment has been checked and is within specification.
- Install the new bolt.
  Renew Part: Toe link to knuckle bolt(s) Quantity: 1 .
- Install and tighten the new nut.
  Renew Part: Toe link to knuckle nut(s) Quantity: 1 .
  
  Torque
  
  Stage 1: 80 Nm
  
  Stage 2: 60°
NOTE: Using Jaguar Land Rover approved equipment, check and if necessary adjust the wheel alignment. SRO must be claimed separately.

Check the wheel alignment and adjust if required.

Refer to: WHEEL ALIGNMENT