Rear Stabilizer Bar - V8 S/C 5.0L Petrol (G2263548): Installation

• Install the rear stabilizer bar.
• Install the 2 clamps.
• Install and tighten the 4 bolts.

  Torque  : 60 Nm 

• CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.

  Install and tighten the 2 new nuts on the rear stabilizer bar link.

  Renew Part: Stabilizer bar link retaining nuts Quantity: 2 . 

  Torque 

  Stage 1: 40 Nm 

  Stage 2: 45° 

Refer to: REAR SUBFRAME 

Refer to: STARTUP BATTERY DISCONNECT AND CONNECT