LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- F-Pace/X761) >> Electronic Engine Controls - V8 S/C 5.0L Petrol (G1917122) >> Removal And Installation >> Right Camshaft Position Sensor (G2244146) >> Installation

Right Camshaft Position Sensor (G2244146): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the 2 Camshaft Position (CMP) sensors.
    • Install the 2 CMP retaining bolts.

      Torque  : 10 Nm 

    • Connect the 2 CMP sensor electrical connectors.
  1. Secure the coolant hose.
    • Connect the 2 right supercharger coolant hoses.
    • Secure the 2 retaining clips.
  2. Install the right air cleaner outlet intermediate pipe.

    Refer to: AIR FILTER OUTLET PIPE T-CONNECTOR

  3. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING