LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- F-Pace/X761) >> Electronic Engine Controls - V8 S/C 5.0L Petrol (G1917122) >> Removal And Installation >> Fuel Rail Pressure Sensor (G2266449) >> Installation

Fuel Rail Pressure Sensor (G2266449): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the fuel rail pressure sensor.

    Torque  : 38 Nm 

  2. Connect the electrical connector.
  3. Install the noise, vibration and harshness (NVH) material.
  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals