LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- F-Pace/X761) >> Electronic Engine Controls - V8 S/C 5.0L Petrol (G1917122) >> Removal And Installation >> Engine Oil Level Sensor (G2244149) >> Installation

Engine Oil Level Sensor (G2244149): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new O-ring seal to the engine oil level sensor.

    Renew Part: Oil level sensor O-ring seal(s) Quantity: 1 . 

    • Install the engine oil level sensor.
    • Install and tighten the 3 bolts.

      Torque  : 12 Nm 

    • Connect the electrical connector.
  3. Vacuum fill the engine with engine oil.

    Refer to: ENGINE OIL VACUUM DRAINING AND FILLING

  4. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD - V8 S/C 5.0L PETROL

scientia non olet · About LEMON Manuals