LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2022 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- F-Pace/X761) >> Electronic Engine Controls - V8 S/C 5.0L Petrol (G1917122) >> Removal And Installation >> Engine Coolant Temperature Sensor (G2249553) >> Installation

Engine Coolant Temperature Sensor (G2249553): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the engine coolant temperature sensor.
    • Connect the electrical connector.
  1. Install the secondary bulkhead right inner panel.

    Refer to: SECONDARY BULKHEAD RIGHT INNER PANEL - V8 S/C 5.0L PETROL

  2. Vacuum fill the engine cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING