Crankshaft Pulley - Vehicles With: PHEV (G2756530): Installation
WARNING: This page is about a different variant/trim than selected.
- Install the crankshaft pulley.
- Install the special tool assembly.
Special Tool(s): JLR-303-1630 , JLR-303-1686
- Install and tighten the 4 new bolts.
Renew Part: Crankshaft pulley bolts Quantity: 4 .
Torque
- Stage 1: 37 Nm
- Stage 2: 90°
- Remove the special tool assembly.
Special Tool(s): JLR-303-1630 , JLR-303-1686
- Install and tighten the 4 new bolts.
- Install the BISG
belt.
Refer to: BELT INTEGRATED STARTER GENERATOR BELT - VEHICLES WITH: PHEV (G2743728)
- Connect the 12V system.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT