Underbody Fuel Line (G2266452): Installation
WARNING: This page is about a different variant/trim than selected.
-
- Install the underbody fuel line.
- Secure the 5 retainers.
- Connect the fuel line.
- Connect the fuel line.
-
- Install the body undershield.
- Secure the 8 clips.
- Install and tighten the 3 nuts.
Torque : 7 Nm
- Install and tighten the 6 bolts.
Torque : 7 Nm
-
- Install the wheel arch air deflector.
- Secure the 3 clips.
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Refill the fuel tank.